Cheesycam Skater Dolly

Videos or Articles related to the Cheesycam Skater Type Video Camera Dollies.

9 Comments

sumo-base-rig
Basic Sumo Rig

Ok, it's not all DIY, but the company 'Shape' is slashing their base Shoulder Support used for their 'Sumo' configuration. The basic Sumo configuration (above) which is a shoulder support, counter weight, and handles will run you $459. The simple dimple shoulder 'base' (below) itself normally runs you $199.

shape-sumo
Shape Shoulder Rig Support Grip

Right now (limited time), Shape has slashed the price of this base foundation in an eBay auction to 'a third' or it's normal price. Hey even on my best day at Home Depot, I don't think I can make something as pretty for that price. Next jump on over to the B&H website where you can grab that pretty little padded 4lb. counterweight for just $69 bucks, and you're good with a very professional looking solid foundation to DIY on. All you're missing is a set of handles, which shouldn't be too hard to craft up.

shape-padded-counterweight
Shape 4lb. Padded Counterweight for Sumo

Here's the link to the base shoulder rig auction: Shape Shoulder Rig Support Grip
Here's the link to the counter weight: Shape Padded Counterweight

34 Comments

It was a scorching hot day yesterday, but the bright sun helped bring in some light into this old unused factory. There was no electricity so the band rented a 5000 watt generator for the shoot. We had full run of the entire abandoned lot which was awesome. This place was huge with several buildings over 8 stories high and had so much texture of steel, brick, and concrete. Sitting right off the water, the place was just so large, we didn't get to see everything. The entire area is private, fenced off, with 24 hour security so we were able to just leave stuff everywhere. I'd love to get back there and shoot again if I could. Would be a perfect setting for a horror film, that's for sure.

slide (1 of 1)

We started indoors with some really slow camera movements on the DIY track. It could have used another saw horse down the center for some additional stability, but worked fine for just slow movements. Going faster, it wanted to flex. We also did a bit of Crane shooting and later threw in some really close up hand held beauty shots of the band.

bts (2 of 7)
bts (3 of 7)

We moved up to the roof in the late afternoon, and to really show off the height we were at, slung a Canon 60D on a crane over the side of the building. A bit scary, but it should be a really cool looking swing from over the side of the building back onto the roof. Hopefully that went pretty smooth, but from what we can see on the LCD it came out great.

bts (6 of 7)
bts (4 of 7)

Next we went down to the outside grounds for a walking Steadicam Shot. The band followed the camera slowly while singing to the music. With the Canon 60D articulating LCD, I was able to walk forward and let the band frame themselves by looking into the LCD. They were able to monitor themselves and stay in frame, while I concentrated on not falling over or tripping on anything.

bts1 (1 of 1)
bts (7 of 7)

I'll get the video footage once the editor hands them back, and show some of the shots we did. The Steadicam looked really great with the Canon 10-22mm Lens I rented and had all this space to run around in. Flying through a wide open room with large glass windows and concrete pillars everywhere had a very cool flying effect. I have to admit that with the changes in light, using the white balance on the 60D was much more effective than trying to set it on the T2i (which was being used for some BTS video). The 3 Canon 60D's worked really well and meshes closer to the workings of the 7D than a T2i. Definitely a great camera to work with. Now that i'm done with this project, I may sell one of them, but tempted to keep them both!

[Thanks to Matt for grabbing these BTS photos while we were running around in the heat]

Related Articles:
http://cheesycam.com/canon-60d-video-stabilizer-first-flight-glidecam-hd4000/
http://cheesycam.com/glidecam-hd4000-bts-with-canon-60d-steadicam-vest/

12 Comments

Running a bit late on the shoot today, but we wanted to have a rail longer than a 4ft. slider. Ran over to Home Depot and quickly assembled a raised dolly track fit for the SpiderTrax Video Dolly. Everything comes right off the shelf, clamps together securely, pretty portable (except for the long rails). The stock wheels fit perfectly inside the Strut channel (same one used in the Cheesycam DSLR Fig Rig Cage). I'm a bit late, but these longer dolly shots should add more worth to this project. Ok, i'm out, but will have some fun BTS video of this shoot soon.

Below: Click for SpiderTrax Rotating Video Dolly Pricing
spidertrax-for-sale

3 Comments

strobies-3way-bracket

Now that Yongnuo is getting into the Flash game pretty heavily, it sounds like these cheap flash alternatives could grab more consumer market share. If you're looking to use the flashes off camera, it's possible to fire them off with the RF-602 wireless trigger system. If you want to broaden the flash area and add some speed to recycle times, you might want to double or even triple them up. By setting each flash to a lower power setting this should increase the recycle time for you to fire off another flash. By using 3 flashes over one, you'll also get a broader softer source of light. Strobies sells an inexpensive Interfit INT337 Triple Flash Bracket with cold shoes and umbrella holder. Now all flashes including Canon will recommend limiting the flashes depending on your power setting, to ensure you don't overheat your flash. That's another good reason not to have a single flash going full power. Check out this video from Aaron on the built in protection of the Yongnuo flash https://www.youtube.com/watch?v=y7XxK_Z3rQ8

Aside from flashes, this handy mount can also be used to mount three of your Video LED lights into a wider array to cover a broader area. If you're using the Z96 LED lights that have the ability to mount together, you might be wondering why you'll need something like this. Consider that by using the Strobies 3 way bracket, you'd be able to position each LED Video light in slightly different direction. Something you won't be able to do if you have them joined together using their current mounting system.

If a threesome isn't enough for you, how about a four way Flash bracket from LightwareDirect called the 'FourSquare'. This four way bracket is sold on as it's own 'Block' or in kits that provide different sized Softboxes to complete your new portable battery powered lightweight strobe. Now this four way bracket would look pretty cool to mount 4 LED Video lights.

foursquare-blockfoursquare-lighting-kit
foursquare-kit-softbox

4 Comments

Watching more and more behind the scenes videos and especially those DSLR meetups going around, you'll catch tons of wicked DIY rigs amongst the crowd. It's quite interesting to see how many people connect and how many conversations can be started from simple ideas. Even though it's also available for purchase, when I released the SpiderTrax Dolly on the internet, it was released as a DIY project.

spidertrax-for-sale

Igus, the manufacturer of linear guide rails, for the past few months have been selling a DIY kit over at Amazon to make your own Camera slider.

The most recent announcement of DIY gear for sale is from audiophile JuicedLink. Yeah unusual as it might sound coming from a purely Audio Gear company, they're taking a different approach to "securely and cost effectively mount stuff to your camera". Looks like they are working on a DSLR cage and bracket of some type very similar to the K-Tek KN2274 Norbert Camera Mount Frame, but let's hope it's not coming in at the same price range. There's a few raw mock up images of their ideas in place, and more information about their new product lineup at the following this link: https://juicedlink.com/blog/2010/09/new-product-preview-affordable-dslr-accessory-brackets/
juicedlink-diyjuiced-link-diy-rig

11 Comments

If you're looking to use a tool only a few times, just a money savings reminder that you can always rent gear instead of throwin' down some hard earned cash. I showed up on the set of the music video (above), and plenty of lenses, cameras, Redrock Micro rigs, and more were all rented from BorrowLenses.com. Specialty expensive lenses like the Canon 400mm F/2.8 that normally run for over $7,000 can be had for about $248 / week.

canon-400mm-F28

Sure sounds like money you could be putting towards owning gear, but talk to a few pros and you'll find out that a big part of the business is rentals. Most pros consider a project and throw the rental fees into the contract. I've rented a crazy 72" softbox and Profoto strobe/battery setup for a photo shoot for a mere $40 dollars a weekend, and that gear was well worth over $4k. I knew I would only use it once, and by adding it into client fees, it just makes sense. Find yourself a good solid rental place, and you'll really expand your work. You'll be able to take on larger projects and consider a whole new variety of ideas. One of the easiest most highly rated Rental place is BorrowLenses.com. Don't let the name fool you, they've expanded quite extensively and I believe are in their third move to a larger warehouse. You can rent DSLR's, Lighting, Audio, Camera bags, and even Computers. There's a long list of gear you should check out to help plan your next shoot. If you're new to the rental game, start with something small. Once you get the groove, you won't feel so limited taking on future projects.

borrow-lenses-rent-camera-lens
Click to Rent Gear from BorrowLenses.com

6 Comments

Just caught a cool video shot on a Nikon D300s from Jeremy Mayhew. Jeremy has been using the SpiderTrax rotating video dolly quite a bit, and has found ways to use it outdoors quite effectively. I'm really impressed with the quality from this Nikon D300s considering it's not even a 1080 shooter. The look on the Nikon Macro lens is also very sharp with excellent bokeh. It's going to be interesting to see the quality of video that comes out of Nikon's new (T2i Competitor) the D3100 DSLR 1080p capable camera that's starting at only $699 w/ 18-55mm Lens. This new D3100 could give Nikon a larger market share in DSLR video, unless Canon releases something more exciting than the recently announced Canon 60D DSLR.

nikon-d3100
Pre-order for Nikon D3100

3 Comments


Troy throws up his version of the SpiderTrax Rotating Video dolly using cheap and readily available PVC (above).

Calixte Works uses the real Deal SpiderTrax Rotating video Dolly available at PhotographyandCinema.com for a few Orbits and Slider shots. (Below)

Below: Original SpiderTrax Rotating Video Dolly
spidertrax-for-sale
The Original SpiderTrax Dolly can be found at PhotographyAndCinema.com