Tag Archives: diy stabilizer

• 18 Comments

•

Ok, you professionals can skip right over this article. This may even fall under 'tacky' for the seasoned Pro's. There's surprisingly a lot of young readers at this blog, possibly still in high school and unemployed. Aspiring to make fun YouTube videos with a standard handheld camcorder, they need an extra hand in some low budget DIY advice. These are probably the easiest & cheapest DIY stabilizers I could think of. So here you go kids, I hope you enjoy it, as I looked quite silly modeling these brackets on various parts of my body in the aisles of Home Depot like i'm creating the next Lady GaGa costume. It's ok though, I can rock a $2000 dollar Steadicam setup and still rock a $2 dollar Shelf Bracket, it's all good....i'm all about inspiring the creativity.

All of these 'Heavy Duty Shelf Hangers' can be found in the same place. These curved brackets are typically used for hanging heavy objects in your garage such as bikes and ladders. Unlike flat steel angled brackets, these are round (tubular) which are more comfortable to grip. There's plenty of different shapes and sizes to use these for adding extra support for your video camera.

photo 1photo 2
click images for larger view

First up is a one sided angled bracket. By just adding a quick release plate on the bottom, you'll have yourself a very sturdy (very very sturdy) handle to your camera. Flat black paint and wrap up the handle with some Tennis racket grip tape, and you'll be in business. Notice the little angle at the top? Could be a nice place to add a cold shoe to mount another accessory. The rest of the bracket can be drilled to further hold more accessories like LED lights and portable recorders. By the way, just click any of the images to get a better look.Single bracket stabilizer for just $2.36.

photo 3photo 4
click images for larger view

Second on the list is a double sided bracket. This is actually larger than what appears in the photo, and the double sides can act like handles on a Fig Rig. Hey this is way easier than trying to build the Cheesycam DSLR Cage Fig Rig. Just place a Quick Release adapter dead center, a little grip tape along the sides, and you'll have yourself a fig rig style camera stabilizer. Yup, there's another angle up top for that cold shoe accessory too for just $5.98.

photo 5photo(3)
click images for larger view

Third on the list, another simple bracket. Used in the position shown in the photo (above) the short angled end (left) actually feels comfortable as a small handle. The (right side) flat side has enough area to act as a chest plate. Throw a quick release adapter on top and you'll have yourself a steady little camera shooter for $5.24. Sure it's not offset, but should work pretty wicked for an HV20 or HV30 with flip out LCD, hey maybe even a Canon 60D with it's flip out LCD.

Yeah I know what you guys are thinking, pretty crazy right? For a group of young students looking to have a bit of fun making videos, so long as the bully doesn't steal your lunch money, you could gain some steady shots with these ideas. Oh and i'm guessing a few of you DIY'ers will be heading down to Home Depot later today to secretly play 'Heavy Duty Shelf Hanger Dress Up'. LOL...Try it, you'll be surprised.....

• 8 Comments

•

indie-hardware-stabilizer-upgradegofit-jump-rope-handle

Thanks to Motegi for sharing a DIY handle upgrade to the IndieHardware Stabilizer. You can catch more of the DIY photos over at the Flickr found here. I did a brief overview of this stabilizer found at this article: http://cheesycam.com/first-attempt-indiehardware-stabilizer/, and like most others, wasn't happy about the stock short handle. The shorter handle actually felt like it had limited range of motion compared to the Hague MMC, but really the range is about the same. Motegi took a simple Jump Rope handle, and added this to the IndieHardware. Since the jump rope handle already has an included bearing, this actually helps improve stabilizing some additional axis movements. This looks like a nice OEM fit that would improve the handling quite a bit. Great job on the upgrade, thanks for sharing Motegi.

Funny how jump rope handles are used in DIY camera gear, as I've used a set in this DIY $20 dollar shoulder mount found here: http://cheesycam.com/20-00-dollar-should-mount-rig-camera-support/ .

• 4 Comments

•

fig-rig-stabilizer-iphone
click image to jump to Flickr

An iPhone is a small device, and so far many of the stabilizers have been short handles. Earlier this week Tate Nations showed us his version of the DSLR Cage Fig Rig painted Red. Tate probably had a lot of left over strut rail to come up with this other use. This has to be the first Fig Rig i've seen for use with the iPhone. Some might think it's overkill, but remember there is an iPhone Cinema Kit out there that will run you about $900 bucks.....now that's 'overkill'. Overkill or not, it's DIY, pure fun, and i'm sure it provides excellent stabilization. Very cool DIY which would be interesting to see people's reactions when this hits those events.

• 5 Comments

•

double-l-bracket
double-l-bracket-stacked

After posting about the possible Double L bracket stabilizer idea, Dave Taylor over at DaveTaylorMP.com shares a few images of his Double L Bracket setup with what looks like a Canon 550D / T2i. He's using the Video Camera Light Bracket - by alzodigital.com which has two cold shoe mounts. He mentions that he also added the Trek Tech T Pod Table-Top Tactical Tripod With Magmount Star to his configuration for a simple Shooter rig with an extra handle. His inspiration for this came from TheC47.com video below. Check it out, looks pretty cool if you can't afford the RedRock Micro theEvent Rig.

I'm still looking to mount two L brackets but with an Aluminum flat bar in between to make the handles more level, and a QR adapter dead center. Maybe i'll change that center AL bar into a 'T' bar so that I can support both a QR adapter and room for the T-Pod configuration. Thanks for sharing Dave!

Update: Reader Chuckarama just sent in this Flat bracket that looks like it will do the job in between the L brackets. Should be able to mount a QR plate and still be Tripod mountable. Great job Chuckarama! Let me know how that comes out when you're done.

• 13 Comments

•

steadicam-gizmosteadicam-gizmo-diy

One of the most passionate DIY'ers tackling the Steadicam Merlin design and Gimbal handle with full rotation that I know about is WSCLATER. If you check out his website over at https://www.diycamera.com/stabiliser, you'll find years of logs refining a single Steadicam project. Yeah I think I would have given up by then. There's seems to be a very similar version showing up on eBay called the 'Steadicam Gizmo'. Personally there's some things I would clean up to finish up the little detail work, but looks really close to what WSCLATER has been working on. Four items sold just today for this Steadicam Gizmo, and parts can be purchased seperately. If you're not the DIY type, you might to check out the handle which uses the same design as wsclater, which might be a good improvement for that IndieHardware stabilizer as an upgrade. Check out the Steadicam Gizmo DIY stabilizer found on eBay auctions.

•

@MunkiCloud checked out the DIY Point and Shoot video stabilizer I made for my Canon SX210 and modified it to mount the new iPhone 4. For a walking and panning shot, I think this DIY Stabilizer for that iPhone 4 came out great. Sometimes it takes a bit of 'dialing in' on how much weight to use and how far to spread those weights. Practicing if you've never used any type of stabilizer is also key. So before you drop down about $900 bucks for an iPhone Cinema Kit, you might have better video results with this DIY stabilizer for probably under $10 bucks...

You can find MunkiCloud's full write up here, and more information on my DIY Video Stabilizer for small Point and Shoots found in my article here.

iphone video stabilizer munkicloud cheesycam

Above: Adapter for iPhone on DIY Point and Shoot Stabilizer

Below: Images of my DIY Point and Shoot Stabilizer

• 4 Comments

•

steddiepod

It's called a Steddiepod and it's available for around $389.00. Now before you go out thinking about buying a stabilizer like this, you need to reflect on one my first DIY's in the DSLR world here: http://cheesycam.com/?p=18

Just thought I would show the basic principle of how I believe this Steddipod is supposed to work. If you've checked on my earlier article, i've used the same principal of spacing the lower weights. (not sure if my version was out first and now it's catching on). On the bottom of the Steddiepod, those legs that hang out 'might' be some type of counter-weight set. By spacing the lower weight very wide, you'll totally minimize movement while walking. I've since redesigned my version from a wooden dowel into an adjustable Monopod with a wooden plank spacing Foundation Bearings on each side (from home depot). You can make your own for probably under $18.00 dollars, or you can opt in for something like a Steddiepod for about $389.

• 2 Comments

•

Props for Vimeo member Daniel Bochenski for rigging up his own version of the ' BodyPod DSLR stabilizer ' I posted up here::::
His video (Above) shows some fine examples of how a monopod, when used correctly, can support your camera weight and give you some super steady footage.

Well the T2i came in for me last week, and I really haven't had the chance to play around with it. Right off the bat, you'll get yourself stuck if you don't have Class 6 (speed) SDHC card required to shoot videos with it. Having the 5DM2 and 7D already those both only use Compact Flash. So get yourself stocked up on some Class 6 rated SDHC cards. Hopefully i'll get some video samples online for others to see soon.

Another problem I had with the camera was the weight. It's super light which could be an advantage in certain situations, but sometimes you need that extra bulk for better handling. I suggest that you pick definitely pick up the Battery Grip by Canon. Not only will it add more grip, it will add more available power, and increase the 'looks per hour' rating on your DSLR.