There were very few available on eBay for a premium price, and now after about 6 months of being out of stock, they're back on Amazon. I guess they worked out the shortage. If you haven't seen how these operate, you can find a video here: http://cheesycam.com/color-changing-variable-color-led-video-lights/
1000 LED Photography Video Light Panel 0% - 100% DIMMABLE COLOR CHANGING 3500K- 6000K TEMP
Well it's been one of the most interesting products available, but the delays could cause the hype to die down a bit. Is it finally going to be available tomorrow? According to one seller it's estimated to be. If you don't know what the Ninja is, you can read the earlier article here: http://cheesycam.com/atomos-ninja-any-day-now/
Tascam DR-05 Portable Audio Recorder
Tascam has released a new DR-05 portable audio recorder that's firing back at the Zoom H1. Set up at the same pricing and target audience looking for a tiny portable recording device, this one might be the real game changer. Specs for the new Tascam DR-05 recording bitrate is similar to the Zoom H1, also includes stereo microphones, powered Mic 3.5 line input, headphones out, built in speaker, accepts MicroSD Card media, powered by (2) AA batteries or optional AC adapter.
Tascam DR-05 Portable Audio Recorder
There's no doubt that Zoom had cornered the market for $99 dollar portable recorders, but there was comments about the Zoom H1 plastic body and battery drain issues. Previously Tascam failed in providing a cost effective portable recorder to follow, as even the DR-03 was pricier than the Zoom H1. The DR-03 was thinner, but lacked mounting options and could only support a limited sized MicroSD card. With the release of this DR-05, this one could take the $99 dollar portable recorder crown. Oh and yes, this new Tascam DR-05 also has a threaded 1/4 x 20 mount (finally).
The Zoom H1 was a sell out for many weeks on it's first release, and from everything i'm seeing, this new Tascam is clearly a Charlie Sheen Winner. Once it arrives, i'll make the decision to move to all Tascam's and sell all Zoom H1's. Check out all the specs through the link below.
The Panasonic GH2 seems to have an almost cult-like following. Die hards from previous GH1 models are lovin' the upgrades the GH2 brings to the table. The great thing about these Micro 4/3 cameras aren't just the ability to adapt any practically any lens, but also the quality of Video they provide. Unfortunately it's still a tough camera to find, and always out of stock. This slow availability of cameras is not helping them gain more market share, which I see was a problem with the Nikon D7000. Still, if you have to have the Panasonic GH2 (as of yesterday), there's a few listings at the big auction site, with a very minimal markup.
Once you've picked up your GH2, you'll want to get a wide angle lens with good aperture. Best bang for the buck is Panasonic's 20mm Pancake lens F/1.7. Great lens, fast, and sharp. I just purchased one (I know i'm late) and it's been a top performer for photography. I'm still not a fan of Panasonic's focusing for video, but the quality of this wide lens is exceptional.
DIYPhotgraphy.net has a really cool article about using a Padded Bass Case to pack up your light stands. These are long very well padded cases that can hold a few light stands as well as other small items. They have straps and some can be worn with a sling or back pack style. These padded Bass guitar travel cases some around $20 dollars or really really padded high quality for about $80 dollars and up to 47" inches long (That's still cheaper than Photography labeled bags). Most 10' foot light stands can collapse to about 39" inches so you'd have room to spare. These long padded travel bags should be good with other long items you might be traveling with like Monopods and Tripods too, and also makes you look like a Rock Star....(or traveling Guitar Hero geek)..
Also some nice non-shaped ones available via eBay:
Someone asked about a quick release adapter that would work best moving from a Flycam Nano over to some other different rigs. If you're not using a Fluid head like the Manfrotto 701HDV, then there's no reason you need to stick with the Manfrotto Compatible QR Adapter. The best low profile quick release adapter would be the Manfrotto 394
. This low profile wide plate is a perfect fit for DSLR's and also doesn't use the twisty little side knobs which makes it perfect for mounting on wide flat surfaces like non Manfrotto Fluid heads, Steadicams, Glidecams, Camera Cranes / Jibs, Sliders, DSLR Cages, and Shoulder Mounts. Yeah sometimes those little twisty knobs off to the side are annoying..
Vimeo member Switch Flick uses pieces from a Flycam Nano to make a DIY Spidertrax Rotating Dolly. Axles are a bit long on this first version, but it looks pretty legit with attention to details down to the bolts (much like I used in my setup). Of course, this is all assuming you've already dished out a bit of change for the Nano.
If you're not familiar with the Flycam Nano, another video was recently shot using a Canon 5D Mark II + 17-40mm F/4L + Rode Video Mic. That's quite a bit of weight, but Vimeo member Spencer Turley managed to pull off some great footage while doing some charitable work out in Tuvalu. Found here: https://www.vimeo.com/20742652
Flycam Nano Video Camera Stabilizer
If you're not familiar with Rotating Dollies, you can see how the Konova Dolly (cloned after my own design) was used in this video: http://cheesycam.com/test-drive-spidertrax-clone-korean-dolly/
A crane is not a video tool you drag with you everywhere, especially if you're a one man band. But the times when you DO bring out a crane, you'll always come back excited about reviewing the camera movements that are hard to replicate in any other way. I thought about DIY'ing my own crane, but after finding this one for just over $100 dollars, it made sense to start with that and modify it as I go. Unfortunately, they aren't available any longer.
When working with a Crane, make sure you have the correct amount of balance (right down to the ounce). Having perfect balance will allow the camera to move effortlessly. I also mounted this setup on a (discontinued) Manfrotto 503 fluid head with a beefy Manfrotto tripod. I used a Manfrotto tripod dolly to make repositioning easy just by rolling the crane around. This portion of the build is a bit more expensive, but there's other options for Crane stands.
We had so much fun getting extremely low shots, to very smooth vertical camera movements, i'm looking to either build or buy a smaller 4ft. Crane. It might seem short, but it's also based on Tripod height. If the tripod is set higher, then the POV will be higher. There is one Bargain brand that seems to have a small faithful following with excellent feedback that I might consider - called ProAm. The ProAm crane can be used in either 8ft. or 12ft. lengths and broken down into (3) 4ft. sections for traveling. Lots of other Crane options, Crane accessories, Crane stands, and LCD monitoring are also available from Bargain Camera's lineup. All found below.
There's plenty of stabilizers on the market in all different shapes and sizes, but finding one to support up to 8lbs. of weight narrows the playing field. Now when you're talking about finding a portable lightweight stabilizer + carry 8lbs. the list gets even smaller. The Steadicam Merlin is one of the best performing portable stabilizers i've used, but has specs to support only up to 5lbs for about $800 dollars, the Glidecam 2000 up to 6lbs, and The Glidecam 4000 can support up to 10lbs for about $550.
The Blackbird stabilizer from Camera Motion Research is said to support up to 8lbs, is cheaper in price, and less than half the weight and size (making great for traveling) compared to the Glidecam HD4000. The Gimbal handle design with universal joint is found on other stabilizers, but this is the largest one i've seen. How well does it perform? Well, there's videos of this stabilizer flying a Sony EX1 so any DSLR should be a breeze. Just by looking at the build quality, there's quite a bit of thought placed into every detail about how this thing works. The stage has a quick release system, can be adjusted forward / back, and left / right with fine tuning knobs. The weights on the bottom are mounted to an adjustable post with clear markings for easy repositioning if you have to take the unit apart. (I often use nail polish on my Glidecam posts to make sure I can line things back up) One interesting feature addresses problems with what most people have issues with (stabilizer roll). By adjusting friction into the Gimbal it keeps the stabilizer horizon more consistent.
Here's a great little review from Vimeo member Firewerkz Films
If you understand stabilizers, how they work, this one is clearly made to address all concerns for getting the camera quickly balanced, easy to fly, and travel light. I'll be putting it together and testing it out later this week, but so far it looks like a great little product. I'll have part #2 of this review up soon.
