The entire sled design and even counterweights are also cut to a similar shape that resemble the Glidecam. If not for the Carbon Fiber post of the Wieldy, I could easily mistaken this for either the Glidecam HD2000 or HD4000.
Here's where a few differences are with the Wieldy. The Wieldy DV Pro Stabilizer states it can collapse to a minimum height of 15" which is similar to the smaller HD2000, but can telescope to about 29" which is about the max height of the largest Glidecam HD4000. The Wieldy gimbal (unlike the Glidecam) can also be repositioned on the post allowing for another fine tuning adjustment, or to use the stabilizer upside down for very low mode flying.
For those who wanted a better look at the Flycam Armbrace, here's a quick little show and tell. The Flycam Armbrace
is used to help carry some of the weight of a stabilizer off the wrist. Glidecam also sells a Forearm Brace (seen here), but it's bit more expensive and looks like it will only fit on the Glidecam due to the larger OD on the post.
One common question is 'Does the Flycam Armbrace work with the Glidecam?'. The answer is 'YES' the Flycam Armbrace does work with BOTH the Flycam and Glidecam HD1000, HD2000, and HD4000 stabilizers. It uses a smaller OD on top and steps to a larger OD for the bottom of the post (as seen in the video). Coincidence? You be the judge. Using an arm brace will help relieve some weight from the wrist, but keep in mind that it will not solve the weight carried from the Bicep and the stabilizer will still be just as heavy. The Flycam Forearm Arm brace can be found via eBay (click here).
Flycam Forearm Arm Brace for Flycam and Glidecam HD Stabilizer