F&V 7″ F3 HDMI / HD-SDI LCD Monitor Giveaway

Manufacturer Quick Overview
The F3 7" Monitor is lightweight, portable, and boasts an 1024x600px LED backlight display. The newly designed LCD screen is vibrant and produces a crisp image perfect for pulling focus. The new LCD screen also has a viewing angle of 170-degrees, giving you freedom of motion while using the monitor. A built-in sunscreen not only shades your screen under bright environments, but also it protects it during travel.

This monitor comes equiped with peaking, black & white, and horizontal/vertical image flip. The F3 monitor automatically detects whether the signal is NTSC or PAL, and you can choose whether to display in either a 16:9 or 4:3 aspect ratio.

This HDMI + HD-SDI model features Composite RCA, Composite BNC, HDMI, and HD-SDI BNC connections.The monitor also comes with a built in Sony NP-F battery plate. The F3 monitor offers versatility at a price point you can't ignore.

F&V F3 7" HDMI + HD-SDI LCD Monitor
The F3 Monitor sports a crisp 1024x600 pixel LED-backlit display. With professional software features such as peaking, black & white, 4:3/16:9 ratios, and more, the F3 Monitor offers a great portable viewing solution for any filmmaker..(Continue Reading..)

Register for the F&V F3 7" HDMI + HD-SDI LCD Monitor Giveaway

14 thoughts on “F&V 7″ F3 HDMI / HD-SDI LCD Monitor Giveaway

  1. I have used this monitor but it has very low color, i mean not as much as i was expecting can you please suggest me any else.

  2. Emm

    Post author

    @Christian - Check for the latest firmware update on your BMPC. Also try different framerates on the BMPC to see if it's just the framerate that can't be supported.

  3. Hi there,
    I can't get the F3 working with the BMPC 4K. It works fine on a Sony PDW700, but when I connect to the BMPC (Output set to HD, Overlay OFF) the "No Signal" writing disappears, but the monitorscreen turns to black.
    No picture.
    Any suggestion?

  4. @Adam @Mic @Emm @nathan

    The F&V F3 Monitor can support 1080i/p 50/60HZ. Recently, Blackmagic released an update to the BMCC that supports this output signal.

    We have preformed some tests, and the F3 monitor DOES work with the BMCC and BMPC. Please note that after updating the camera, you need to set the camera's SDI Output Overlay to OFF.

    You can also find an overview video of the F3 on the F&V website. Visit the F3 product page, and just click the "Video" tab near the bottom.

  5. Emm

    Post author

    @bro - Since they have to wait for mail in entries, the announcements don't happen as soon as the giveaway ends. It takes a while to get all entries in and then to make actual contact with winners. The website will post the winner.

  6. Emm

    Post author

    @Mic - The BMCC is a camera that outputs uncompressed 10 bit 4:2:2. There's actually a few monitors and displays that won't work with this feed.

  7. Emm

    Post author

    @nathan - What did you want to know? It's a pretty straight forward LCD monitor with peaking, good color, and resolution (not HD).

  8. Emm

    Post author

    @Esperandoaleti - Sorry. the 'Internet' still falls under State / Federal / International laws for promotions. Different companies (who offer these products) are based in different countries and each promotion requirements will always vary.

  9. Esperandoaleti

    Monitor giveaway? only US residents! Well, many thanks from the rest of the world! This is Internet guys!

Comments are closed.