600 LED Video Light DIY Battery Pack

IMG_0631
Tekkeon Battery on 900 LED Video Light

I use the Tekkeon batteries to power up my 600 or 900 LED Video light panels. Great for remote location shoots where an outlet isn't available, cheaper than a Sony V-Mount battery, but Tekkeon batteries can still be a little expensive (article here).

photo_08photo_04
ATC Power Bank on 600 LED Video Lights

TRIX writes in and shares an optional (and cheaper) solution for a DIY battery pack using the ATC Power Bank Black Mobile Pack (found here) to power up a couple of the new style 600 LED video lights [Thanks TRIX].


CN600SA LED Video LightLED 600 Video Light Lite Panel
find-price-button New 600 LED Video Light Panels

These Li-Polymer battery packs can switch output voltage from DC 12V/16V//19V 60W, USB 5V/1200mAh. For either the 600 or 900 LED light, you can use the 12V or 16V option. From the tests TRIX states the 600 LED Video light panels can run for a little more than an hour at Full Power. Perfect for quick remote location shoots and at half the price of my Tekkeon batteries.

51Yp-OU87kL._AA300_
find-price-buttonATC Power Bank External Battery Pack 16000mAh

The ATC Power Bank Mobile Pack comes with a few different adapters, but does not have the correct cable to work directly with the LED Video lights. You'll need to get a separate cable that has a 2.5mm ID & 5.5mm OD barrel plug on each end (one for LED and one for ATC pack). An example of the exact cable you'll need can be found on eBay (Click Here).

DC power plug Double 600 900 LED light
find-price-button 2.5mm 5.5mm DC Power Cable Double Plug

For those who are outside of the USA there's a seller available on eBay (Click Here)

600 LED Power Bank
find-price-button PowerBank Universal External 16000mah Battery Pack





21 thoughts on “600 LED Video Light DIY Battery Pack

  1. Emm

    Post author

    @Rick - If it has AC/DC converter and two standard plugs, most likely it will power both your LED units. They don't require much power. The only issue would be that some of these AC/DC converters use a fan to keep the battery cool. That could be added noise to your set.

  2. Rick

    regarding those jumper batteries like the Duracell one... do you need to buy any adapter/cables with those? And does any brand do the trick or is there something to look for before buying one of those?

  3. Emm

    Post author

    @Van - One Sony battery is 7.2V which is not enough. You would have find a way to wire up two of those batteries properly.

  4. Emm

    Post author

    @Jack - From the specs it looks like it could through the USB port. One thing to note is the size of this battery. Maybe not heavy, but it looks quite wide.

  5. Emm

    Post author

    @Joe Ed - I don't think it will. The Canon Rebel LP-E8 is 7.2V, and this battery does not appear to offer this option.

  6. Note

    Emm--thanks,
    I have some sony v mounts but it seems that on amazon some 500 leds are cheaper without the battery, and was wondering if getting an adapter/cable would be a cheaper option

  7. Emm

    Post author

    @Darryl - Those jumper batteries are great options. I have used them on the LED lights also, and have even used them to power up my Canon cameras on location using the AC/DC power adapter. A bit heavy, but great option for location shoots.

  8. Emm

    Post author

    @Allan - I don't have this particular battery, but I ran a test on a 900 LED Light with Tekkeon for a little over one hour @ full power.

Leave a Reply

Your email address will not be published. Required fields are marked *



RSS Feed Widget