Not sure if you can see the thumbnail in the video, but something about that slider doesn't look quite right. Oh yeah it's upside down! Vimeo member phoSumpro! shows a new way to use the Konova slider. Actually seems like a new way to use any camera slider. By mounting the slider upside down with the carrier Tripod, he's actually sliding the entire rail (not the carrier). I'll let the video explain why this was done, but that's one pretty cool trick. Sorry guys, but don't think this would work on a non Roller Bearing type slider. [Thanks phoSumpro!]
Monthly Archives: February 2011
Comer-like 1800 Lumen LED Video Light
Heard of Comer LED Video Lights? It's a damn good LED Video light with a damn good price tag attached of over $300 dollars and doesn't even come with a battery. The design of the Comer lights are also much different than just a flat square panel full of LED bulbs. The second generation of Comer LED lights has a newer design with 10 LEDs on the front panel.
If you wanted a Comer, you had no choice but to buy one. Well, up until now I guess. There's a new LED light floating around recently that looks similar and claims the same 1800 Lumens output, so could this 'other' LED light be a Comer Clone? It sure does look like it through the limited amount of the photos I could compare online. From design, features, position of buttons and switches, it's pretty close. This 'other Comer-like is coming in about half the price and unlike Comer, comes with a Sony style Rechargeable battery + charger. Anyone sporting a Comer now, or experience with these Comer-like lights?
Canon T3i / 600D Product Samples
A couple of videos about the Canon T3i....
Canon Kiss X5 and Kiss X50 (Rebel T3i and Rebel T3) from SpacePigTV on Vimeo.
LOOP (shot with EOS 600D / Kiss X5 / Rebel T3i) from Canon France on Vimeo.
Atomos Ninja – Any Day Now
If you've been following the long wait for the Atomos Ninja HDMI recorder, then you'll know it should start shipping this week (hopefully). It's a sexy little unit that acts like a low res monitor, but is really a portable recorder to capture uncompressed Video goodness. Many times this is done by connecting a Video camera to a computer of some sort and a capture card. Above is a nice little example from Vimeo member UrbanFox.TV or what the Ninja is all about. It's already been delayed for several days and i'm waiting to see some examples.
DSLR shooters probably aren't going nuts for something like this because it's pretty rare to get clean HDMI out for recording. Sure the 7D outputs in 1080, but there's something not quite all there.. Other non DSLR camera shooters who use higher end Canon's, the fancy Sony's, and Panasonic are literally drooling for a portable solution to capture uncompressed HD output signals. Sony camera like the EX1 will need SDI input on a recorder, so soon another version 'the Samurai' will meet those requirements. [Note: Though your camera may output uncompressed signals, the Ninja saves the incoming signal to Apple ProRes]. Rumor mill is that only 250 units will touch US ground on this first shipment and who knows when the next batch arrives. If you weren't on the pre-order list and didn't get confirmation to receive one soon, it looks like someone is making one available via eBay.
Sub $30 Dollar 4.3″ Mini LCD
Not long ago I toyed around with a 3.5" mini LCD for about $26 dollars. It also worked on the GoPro HD Cameras that (at the time) lacked any LCD viewing. Now that GoPro has released their LCD BacPac there's no need for this. It definitely would have helped the guys out while shooting testing the Korean Dolly out in this video: http://cheesycam.com/test-drive-spidertrax-clone-korean-dolly/
Reader Alex writes in and decides to go about .8 inches larger from the 3.5" to the 4.3" still at the same price. This little LCD also includes settings for adjustment, but would stepping up another inch provide better color, contrast, resolution? We'll just have to wait to hear back, but Alex says it's all working out and more robust than the previous. For cameras that lack a certain angle of viewing, $26 bucks sure would help on those low rotating dollies & sliders shots for framing.
DSLR Gear – Attack of the Clones
It's bound to happen, so here's another version of a ready made rotating video dolly newly to the market. This one comes from the little known company Lensse. Obviously it does what other rotating dollies can do, but unless it's wider than what appears in the photos, the narrow stage doesn't seem like it's going to be practical for some type of a Fluid head mount. Hmm..might be good for tiny cameras and a mini fluid head?
Next one (above) looks very similar to a DVTEC MultiRig Pro. If you're not familiar with what that is, you can find some Vimeo videos here: https://vimeo.com/search/videos/search:dvtec/e30032e7. It's a multi configuration type rig that can go from shoulder support to handheld. Doesn't look to have all the pieces of a true DVTEC, but it doesn't have all the price of one either. You should check out the link below to see all the different configurations this type of camera support can origami into..
DSLR Rig Shoulder Mount Video Kit
Next item (below) another Video Stabilizer based off of the Merlin, Hague, Lensse, IndieHardware design. Yeah I know right? Even clones can get cloned. Well to be fair, it looks closer to the IndieHardware over anything else. Love the write up in the auction about being 'The Secret Weapon" and "Latest Innovation". LOL. While the others are set on pricing, at least this starter is throwing out a few auctions.
650 watt Lighting Kit Review – ‘As Arri’
I've had the chance to work with Arri's 650 and 1000 watt lighting kits a few times and they are beautiful. The fresnels allow the lights to be adjusted in Flood or Spot which makes them easier to throw the light where you need it. Of course, they are a bit pricey. Just a few months ago I posted an article about certain lighting kits that claimed to be 'As Arri' found here: http://cheesycam.com/arri-blueline-jietu-fresnel-lighting/
These 'As Arri' lighting kits sold at less than a third the price and claimed to be an exact 1:1 replica of Arri lighting kits. So close in fact many of the replacement parts can be ordered from Arri such as the bulbs, Fresnel glass lens, ballast, barn doors, scrims, etc. They are available in 150, 300, 500, 650, 1000, and 2000 watts. The most common kit being a 3 pc 650w should cover most situations.
Not much information is available on the web, so these still aren't very popular, but just recently a brave soul (Vimeo Member) Josh Donnelly took a chance and posted a video review. Looks like it's time to bump this one back up on the wish list.... [Thanks Josh]
Last Minute Glidecam Mods + 352 LED Ring Light
[Video and Audio are terrible. Shot with a cheap Point and Shoot]
Not sure if the post shows up, but it's about 1:00 a.m. (in the morning). I received a super last minute call to help out with some Glidecam work on an event. So I decided to hack something up which I think would be helpful. When flying on this Glidecam i'm closing down the aperture to keep things in focus. This means less light. So I decided to mod a few RC batteries together to power up the 352 LED Ring Light. It's bright, it's well diffused, and it's dimmable. It's the perfect light source for what i'm trying to achieve during this event. [BTW the light at the end of this video is turned all the way down - it gets brighter!]
In order to mount the large 352 LED Ring light, I needed to raise up the 60D with a battery grip and then place it on top of a Calumet quick release adapter. A few flexible power arms kept the LED Ring light mounted and also the Rode VideoMic Pro in place. With the 60D Manual Audio + Rode VideoMic Pro +20db, it sounds really good. Anyways, this rig might be overkill so I also balanced out my 7D on the Glidecam HD1000 for times I don't need lighting or audio. Ok, time to nap. Could be a long day...
Test Drive SpiderTrax Clone – Korean Dolly
The original SpiderTrax Dolly is no longer available via PhotographyAndCinema.com, but the Korean company Konova copied the design pretty much dead on. This would be the better alternative aside from making one on your own. Here's some friends working with the dolly during Valentine's day. They let the dolly control all the camera movements with no fluid head. Since there wouldn't be any panning involved during the motion, they mounted a simple Heavy Duty ball head normally used for photography.
Professional Heavy Duty Ball Head Quick Release
By just using the wood flooring, table tops, counters, and other flat surfaces, they were able to achieve a variety of different movements you can't replicate with just a straight slider. For areas that might not be completely smooth, you can carry a roll of Heavy vinyl plastic (comes in rolls) found at any hardware or fabric store. This Vinyl material will even allow you to run on firm carpet. If you haven't had time to make one or if you're not rockin' a rotating dolly yet, this gives you an idea of how versatile it can be. It's an extremely inexpensive tool that can boost your entire video production with these unique movements. [Thanks Guys]
