The new CAME 6000 2 Axis Gimbal Stabilizer does very well to keep a camera's horizon level. It's dead quiet, and easy to balance small DSLR sized cameras. The brushless motors are covered, the wiring is run internally to the Carbon tubes, battery is covered, and control board is covered. Aesthetically this system looks simple, and is simple to use. For the price, it's certainly not the cheapest when you look at DIY kits, but for some people the RTR (ready to run) convenience is a plus. The biggest downfall is the lack of side handles.
Only a few hours after receiving the unit from CAME-TV.com, I was already modifying a set of side handles. Eventually my plan is to create a solid metal 90 degree clamp to add a 15mm rail (as seen below).
15mm Rail Adapter Concept - cheesycam.com
Until then, i'm using a simple 3/8" conduit clamp attached to a single 15mm rail clamp with a 1/4-20 thread (seen here). A small bolt runs through with a series of lock washers to prevent it from coming loose. Using a 15mm rail opens up new options for adding other industry standard accessories. Additionally i'm hiding the top 1/4" bolt by mounting a mini ball head for a monitor. Not too shabby for the time being..
After configuring the side handles, we took the CAME 6000 2 Axis Gimbal out for a walk with a Panasonic GH3 mounted. [ Note: The video below contains some very boring 5 minute walking material. ]. It's easy for companies to pick out only the best footage of their products in use, so in this video we decided to show UNCUT FOOTAGE and the BTS from this sample.
If you manage to make it through the boring part, you'll see transitions from normal shots, to low angle (doggy cam) footage, and even doing some (rookie) hand offs to another operator as the Gimbal becomes too heavy to manage after a few minutes. Simple moves, but almost impossible to perform with your average stabilizer a.k.a steadicam type device.
Although our technique, skill, and experience with gimbals is far from perfect, this modified CAME 6000 2 Axis Gimbal for the most part did it's job to keep the horizon level. Keep in mind in this example we're continuously walking all in one take - something that may not be too common in your production. Typically we're just looking for an effective way to stabilize hand held video when working off of a tripod, and I think this tool does very well in that sense. In worst case scenarios, there's also the option of adding post image stabilization which will I think will be more effective when shooting 4K video > 1080p (i.e. cropping, leveling horizons, etc.)
I'm a fan of working with smaller tools whenever possible, so I also like how compact this system is. It folds down with a low profile, and we have even managed to fit it into one our cheap hard cases (found here), with room to spare if I wanted to throw in the HDMI monitor, and more.
Here's an old video for reference on how I go about balancing these gimbals (click here). I do believe that if CAME-TV wants to sell more of this particular stabilizer, they should really look into adding side handles, but until then it's not too difficult to DIY your own. You can find the CAME 6000 2 Axis Gimbal over at their website http://CAME-TV.com or also found via eBay (click here).
CAME 6000 2-Axis Active Gimbal Stabilizer