Tag Archives: PVC Stabilizer

4 Comments

diy-freefly-movi-pro-cinemilled-pro-ring-fig-rig

So the new Freefly systems Movi Pro Gimbal basically sits inside of a Fig Rig (as seen in top left photo). If you're looking to get similar functionality with your Came-TV Gimbals, they all come w/ Quick Release Adapters so that you can mount those gimbals to just about anything. Here's a basic PVC frame you can build for your small Optimus Gimbal or Mini-3 Gimbal that can offer similar function.

DIY Gimbal Fig Rig Stabilizer  Frame
DIY Gimbal Fig Rig Stabilizer Frame

Using 1/2" PVC, the corners are made up of (2) 45 Degree elbows. Top handle is a T connector + (2) 90 Degree Elbows. The feet to keep it standing are (2) T connectors and some scrap PVC capped off. Basic bike grips used on sides and on top handle (bike grips work well on 1/2" PVC). No balance stand needed to set your gimbal down, and you still have a top handle and dual side handles. Decent for those smaller gimbal systems to allow you to hold and operate your camera as you would a Fig Rig stabilizer.

 4 Comments

Leave a Comment

Here's an interesting DIY stabilizer for those of you just starting out with small camera video. YouTube member Dean Barkley put together his DIY Fig Rig stabilizer and doubled up use as a table dolly. The entire frame is made up from common and cheap PVC. [Thanks Dean]

 Leave a Comment