Tag Archives: DIY DSLR Cage

Leave a Comment

Another video with a few different additions to the DIY DSLR Cage project. This time, YouTube member browncowvideo uses a Miter Track channel for the top rail. This allows the mounted accessories to be adjusted left and right. Another added addition is the swing out feet that allows you to rest the Cage on a flat surface, a very simple yet functional idea. [Thanks Brian]

 Leave a Comment

Leave a Comment

diy-cagedslr-cage-diy
visit-button DSLR Cage Rigs on eBay

Here's an interesting DIY DSLR Cage that appeared on auction. It's like a camera caddie meets rotating flash bracket type layout. From the description it's a one off piece, but a very cool setup of handles, base, and accessory mounting points. There's a bit of a back story in the auction details if you want to check it out. It's too bad this thing never flew into production, if the price was right I think it would have done well. This looks like it could have easily stepped in where Varavon's DSLR Armor is trying to take place. Either way, if you're a DIY'er time to take a close peek at this design to spark some creativity. Unless it's sold, you can find it here.

 Leave a Comment

2 Comments

Vimeo member Lolo Two is at it again with another DIY project. This time using EMT a.k.a conduit to assemble a solid DSLR style Fig Rig / Cage. Interesting to see the 90 degree Conduit connectors in use, and gives me more ideas on where I could use these things. [Thanks Lolo Two]

If you haven't passed by your local hardware store and looked through the Conduit / EMT section, you'll be surprised to find a whole bunch of clamps and connectors that have a ton of uses. I think I found some very cool clamps that can be mounted to 15mm Rails as accessory mounts.

As far as a DIY cage, I'm still hung up on my DIY DSLR Cage found here: http://cheesycam.com/cheesycam-exclusive-diy-dslr-cage-stabilizer/. Using inexpensive strut channels in my design requires zero drilling and just two cuts to assemble a solid rig with a bunch of different mounting points.

 2 Comments

4 Comments

Ready for a sweet little DIY DSLR Cage? Submitted by Andy Clancy, this cage was put together from an off the shelf light tent kit and a cheese style plate. The main part of the cage originally was a light tent for small product photography. A few bike styled handles on the rails, and the rest should be pretty easy to figure out.

diy-dslr-cage

The rails look to be aluminum and can probably be cut down to just about any size camera you own (including small GH2 shooters). Just by looking at how this guy is put together, it looks super light weight, adds tons of ways to stabilize a handheld shot, ability to get some really low shots, and tons of piping to drill mounts or add some cold shoe adapters for accessories (like a monitor). [Thanks Andy]

Screen shot 2011-03-17 at 8.51.57 AM
find-price-button Product Photography Light Tent

The second part for the 'baseplate' was from a Glidecam Camera Weight (Cheese) Plate.

Screen shot 2011-03-17 at 8.51.42 AM
find-price-button Glidecam Weight Plate

 4 Comments

1 Comment

It's been a while since we've seen the ol' DIY Cage in use, but this one turned out pretty cool. He's got a few enhancements over the very basic design which you can find more about it over at Vimeo member Ben Sheriff's page. [Thanks Ben Turned out Great]

 1 Comment

132 Comments


Since the dawn of HD Video DSLR's there's been some random and weird stabilizers being made by so many different companies. One thing is for sure, they are out to capitalize and mark up equipment from hundreds to thousands of dollars. Not to say they aren't functional. In fact many of these new DSLR cages and Fig Rig style stabilizers work well for these small cameras. You know me though, there's gotta be a way to make something cheaper, just as functional, and still look damn good.

Well i've been looking at a couple of different designs, and thought about what I needed from each one of the stabilizers above. First, I wanted a handle. Handles are a great way to get some really low shots. Secondly, my hands needed to be spaced apart. It's proven that spacing your hands further from the camera can really help stabilize your footage, even helps when walking. Third, I needed something to mount extra gear like a DSLR Cage. Finally, stay away from PVC. PVC is great, but doesn't give it that professional look or feel. After careful consideration and a trip to Home Depot, here's the latest DIY Camera Stabilizer from Cheesycam.com.

My goal was to merge a couple of different products and functionality into a very very Cheap DIY DSLR Stabilizer with Cage function. Another goal was to step up my game and make it look a bit more techy and something not so 'DIY'. I think I did well this time around for approximately $30.00. Actually it can come down much cheaper if I could find a shorter rail and cheaper handlebar grips. Unfortunately I wasn't shopping for a deal, I had this idea stuck in my head that needed to get out. It's a bit of a rush job, but I really wanted to share it with the community. I'll go back and refine it later with some hot shoe adapters and a quick release plate.

I have a ton of photos, and a parts list i'll put together later if anyone is interested. The video should explain more about what you need and how I put it together. The hardest part was cutting this rail. I have more information about this rail in my photo gallery, I was able to take a picture of the Price tag / Description from my iPhone. After cutting the rail, I was able to purchase everything for straight bolt on without any further modifications needed.

Here's a real basic parts list:

  • 2 Hex Bolts (6" long 3/8 size)
  • 2 carriage bolts (6" long 3/8 size) Use these for the top, they give you nice finished look
  • 2 3/8" coupler nuts
  • 2 - 1/2 X 12" pipe rods
  • 1 - 1/2 X 10" pipe rod
  • Bike handle grips
  • Black flat matte paint
  • 1 - 8-10 ft strut channel bar
  • Enjoy the DIY video on how I made it (below).

    Update: Really good questions coming in, i'll try to answer a few.
    Reader: Have you thought about off setting the camera so that with the lens it's balanced front to back?
    CheeseyCam: Yes, this is where the quick release plate comes in. I decided on the Monfrotto 357 (found here) to give me that lateral as well as something to quickly move from the DIY cage to my 701HDV Fluid head. I wanted the camera more forward originally so that it is actually balanced with the handle (above). For shots that require using the Handle, it's much more balanced being slightly forward. Hopefully the Monfrotto 357 will help by sliding the camera either foward or back depending on what shot is being taken.

    Monfrotto Quick Release 357, click image

    Reader: If you were to use electrical conduit for you end pieces it might make your rig lighter.
    Cheesycam: Yes, I wanted to get something as close to 'off the shelf' as possible. I may try Conduit on the sides, but the top Handle I feel will work better if it remained as a Steel pipe. Conduit normally comes in super long lengths and requires additional cutting. It is lighter, and cheaper, just a little more time consuming though with the cutting. For information on the HotShoe mounts I plan on using, check out this article http://cheesycam.com/?p=723

    Ok well it's getting late, i'm tired and i'll get to showing it off more later. Leave some comments, ask some questions, and please don't forget to share, twitter, facebook, digg, etc. (use the icons below).

     132 Comments