Tag Archives: came-mini2

54 Comments

Many times people complain about the horizon being offset, or possibly the camera's horizon may drift over time. This could easily be caused by the 'mode' or 'profile' the gimbal is currently working in, and not necessarily a problem with the gimbal itself. Understanding the profiles, how and when to use them is important if you want to achieve best results. Many of you may be surprised at how much the profiles can affect the results your getting with your gimbals.

This video covers the different profiles on the new tool-less CAME-MINI2 Gimbal, and how these different profiles can influence camera's position during operation. It also covers how to modify the service modes so that you can manage the gimbal and calibrate it without a computer connected. It also covers troubleshooting your Joystick RC Trim if you believe your camera position 'drifts' over time. Keep in mind, that these settings are not unique to this gimbal, but for any gimbal operating with the same SBGC software.

So the next time you're running around operating your gimbal, and things may not appear level or squared up, think about what mode you're working in. Your gimbal may just be following directions, and not necessarily out of calibration. Profile 2 seems to be a good fit for tracking subjects and setting your Joystick to control 'only tilt' will help you manage your gimbal while keeping the horizon level. You can easily change the 'speed' of your joystick so that the camera movements will still appear smooth.

Also, take advantage of your Service Modes by using the Profile 4, Profile 5, and Long Press options. When you're out in the field make it a habit to square up your frame, level your camera, and calibrate your sensors (set a new home position). Unfortunately this video was probably very boring, but hopefully informative in some ways. If you have any questions, leave your comments below.

To find out more, visit the product page for the CAME-TV CAME-MINI2 Gimbal (HERE).

came-tv came-mini2 gimbal came mini gimbal cametv mini gimbal mini2 gimbal
find-price-button CAME-TV CAME-MINI2 (v2 Tool-Less) 3-Axis Mini Gimbal Stabilizer

 54 Comments

10 Comments

The new CAME-TV CAME-MINI2 Gimbal seems to be getting very positive reviews, but the one issue people may have had to worry about was internal wires tangling up on the Roll motor. So to prevent this problem, CAME-TV has updated the MINI2 with a special Roll motor clamp.

Some of you who may have received the gimbal recently may already have this, but for others who received earlier units this video is for you. So here's a little demo on how to install the Roll motor clamp on the CAME-MINI2.

If you use your MINI2 gimbal in inverted mode, you may have to play with the final position of your roll motor clamp so that you still have some degree of rotation. I found that placing it on the side of the motor works pretty good for using the gimbal in both under slung and inverted modes. For more information about CAME-TV's latest tool-less adjustment mini gimbal, check out the product page where there's a few CAME-MINI2 videos (here).

came-tv came-mini2 gimbal came mini gimbal cametv mini gimbal mini2 gimbal
find-price-button CAME-TV CAME-MINI2 (v2 Tool-Less) 3-Axis Mini Gimbal Stabilizer

 10 Comments