Tag Archives: brushless motor encoder

17 Comments

In my first review I mentioned the CAME-ACTION Gimbal could not mount a GoPro LCD BacPac because of the short screws. But I did mention I believed it was strong enough if we could find longer screws. Because people were asking, here's a demo of the CAME-ACTION GoPro Gimbal (with Encoders) supporting the weight of a GoPro with LCD BacPac and ND Filter.

It still works perfectly and is able to stabilize all this extra weight. Checking the website, there are less than dozen left. Hopefully it's not something that goes out of stock and you have to wait weeks for another batch, so if you're still deciding, this is a great GoPro gimbal and it's possible to support all your GoPro accessories.

came-tv action came-action gimbal encoders
VIEW-ITEM CAME-TV GoPro 3-Axis Gimbal with Encoders

Here's an adapter you can use for Painter's Poles if you want a cheap extension for your GoPro. find it (here).

painters-pole-adaptersa1501-view-2-2
find-price-button Seaport Digital Painter's Pole Adapter with 1/4-20 Male Thread

 17 Comments

121 Comments

People have been asking to see some video footage from the CAME-SINGLE, and so I thought I'd throw something up. It's not pretty, but that's exactly what I was going for in this example. Here you've got over 4 minutes of Raw footage, uncut, unedited, no slow motion, and no image stabilization. I've also included a BTS video showing the gimbal in use.

Single handed gimbals are great, but this means you have to be extra careful as well. Two handed operation will always allow you to be more stable. So in my setup i've added a 15mm rod adapter under the handle, a 15mm rod horizontally, and two 15mm handles.

Even though i've added extra handles, there's several instances to which the gimbal was in extreme angles (low mode) and time where I only operated with one handle. The gimbal still performed pretty darn good. For those who are familiar with using alexmos gimbals, you'll notice there are no 'twitches', 'micro jitters', and the horizon (roll) did not drift. It stayed level after the entire time even after panning, tilting, and low mode shooting.

In any case, hopefully this footage has been helpful. The CAME-TV CAME-SINGLE gimbal can be found at their website (found here).

came-single-hero
find-price-button CAME-TV CAME-SINGLE 32 Bit Gimbal with Encoders

A few people have asked, so here's the basic setup I used for my handles. First, I attached a Pico Plate under the handle, and this lets me attach a 15mm Rod.

kamerar pico plate

I used PVGear 10" Carbon Fiber Rod (super lightweight).
10inch_ruler_angle_c_large

And finally I was able to my 15mm Handles to each side.
smallrig 15mm handles came-single gimbal

 121 Comments