P&C GearBox GB-1 Now Available

The P&C GB-1 GearBox sold out on it's first day, and a small second inventory has become available again today. If you're not sure what this is, you can check out the previous article (here).

gearbox-rigged-sm

If you already have the GearBox itself, you will be able to upgrade to the 15mm Rod system with the GB-R Kit. For those who want both in one purchase, there will be a GB-2 GearBox Bundle available on the website.


DSLR_Video_Cage_GearBoxPhotography_and_Cinema_Cage_GearBox
find-price-button P&C GearBox - DSLR Cage Video Accessory Bracket

 61 Comments





61 thoughts on “P&C GearBox GB-1 Now Available

  1. MeezinSeason

    Disregard, I just watched the video again and I see they fully swing out the LCD on a T4i. Thanks.

  2. Emm

    Post author

    @Ralph F. - It will come with a hex tool, and we find a hex can be tightened better than a coin. Hopefully you won't need to reconfigure your setup constantly. One I have mine configured it pretty much stays that way.

  3. Ralph F.

    Emm: Nice job. I like the heft of this cage, its looks and the build quality. I look forward to using it for years.
    One question: Why hex screws? We all carry something to address flat-head and phillips screws, but this cage will require me to carry another tool, for it alone. Why?
    Thanks.

  4. robert

    Hello can anyone tell me the name of the mount used for the shotgun at the top of the cage? Otherwise can anyone recommend a mount for a shotgun the ends in a female 1/4 20 even if it's a part of a shoe extension?

    Thanks

  5. @Emm purchased the GearBox and Rail Upgrade Kit separately over the past week. It's an great looking piece of gear at an incredible pricepoint. On a side note, I'd love to know where the handles in the P&C setup pictured in this post come from. I'd also love to know where your handles in the swiss rod explanation video came from. They look sturdy and I like that they don't have any colored accents. If you've got the time I'd love a heads up on those bits of gear.

  6. getem

    @Emm
    Thanks for the heads up, quick question though. I just put a monitor (5.6") and wanted to know what size would be good for a friction arm? The 7" or 11"? Also I seen P&C sells them, but Amazon sells these
    http://www.amazon.com/FMA-1-Variable-Friction-Adjustable-Kamerar/dp/B005HQ5O8K/ref=sr_1_2?ie=UTF8&qid=1344919381&sr=8-2&keywords=friction+arm

    Are they the same?

    Thanks a lot, plus please spread the word as I am building my rig for a shoot next week and really want to have it decked out with the rods and all
    thanks

  7. Mike

    Got mine today. Good build quality. I really like the handles. My t4i with battery grip fits nicely. P&C decals have already fallen off. They just won't stick to the rubberized handles. I'm gonna try a dab of super glue. I think it would be cool if the handles had a compartment to store allen wrench and and extensions...

  8. Jason

    Yea it's definitely on my shopping list. Thanks for the info. Ive never been really interested in cages because they have that same general industrial design and just seemed like too much for me. The P&C gearbox seems much more practical and appealing visually. Like I want to go pick it up and use it. I dont get that other feeling from cages..if that makes sense.

  9. Emm

    Post author

    @Jason - Take a look at these cages. They are meant only for mounting accessories, and not used for any hand held type of use. http://cheesycam.com/trusmt-ultimate-cage-video-review/. Those cages are also pretty proprietary not allowing you to use a variety of camera bodies. The P&C GearBox is designed to give more options to use it as either a simple mounting bracket, or with lightweight setups (especially for my NEX-7), it can be used as a handheld stabilizer (fig rig). It's probably one of the most affordable and versatile cages on the market, and allows you to break it down for travel.

  10. Jason

    Joel, Emm, Seenematic:

    Thanks for the response and insight. My first exposure to a cage was on this site 2 1/2 years ago, (LOL) and I guess from there I always assumed it was for hand held shooting like a beefier fig rig based on how Emm was demoing it. I feel silly now that I never thought about it being used in conjunction with a tripod. Kinda like a "no duh" moment. Anyway, thanks guys!

  11. Emm

    Post author

    @vaitor - I haven't heard of anyone having problems with Paypal international. I also cannot send totals directly, as I don't handle any of the products.

  12. vaitor

    @emm

    sorry can you check on the paypal system? i'm abroad but i cant order since paypal is not adding the int. shipping? people above have the problem too I think... Or is it possible to just sent the total amount directly?
    thanks for checking! cant wait to get cage+rods, great design!

  13. Emm

    Post author

    @getem - The Rails and Rods were in last week, but they were waiting on a single thumb screw to arrive. Those could be in as early as tomorrow. They didn't expect the Rod Adapter to be a popular item, so the first inventory that arrives will be small. Keep checking the site, or make sure to register on the newsletter.

  14. Emm

    Post author

    @Brandon - I used a 90 degree clamp at the bottom, one 15mm rod vertically, and then a handle.

  15. Emm

    Post author

    @Adam - For USA it's free shipping, and the Rod adapter upgrade will come out to the same price (during the introductory pricing).

  16. Joel

    Jason ~ if you are flying totally handheld, the shot you are capturing would normally be design to not require live focusing. For shots that would require you to pull focus while shooting, you would use a shoulder rig (with which you could emulate a handheld shot).

  17. Adam

    If I buy the GB-1 now and the rod kit later is it going to cost me significantly more than waiting for the combo together? I really want both but also want to get it asap.

  18. Brandon

    Thanks for the responses! Appreciated.

    Last Question what parts/mount did you use for your handle configuration the way you have it set up is ideally how I wanted mine as well.

  19. @Jason : as Emm said, with all this equipment attached to it this is of no use for handheld work. It might be if it wasn't that rigged out, sorta like a fig rig.
    But in general a cage is way too front heavy.
    You need to mount it to either a tripod, shoulderrig or crane. On a monopod this would be way too heavy either. And for most sliders it would be off balance too I guess.

  20. Emm

    Post author

    @Jason - In this configuration it's used as a cage or video accessory bracket to mount all your accessories on a tripod. You dont have to carry it, that's optional. Many shooters dont ever go handheld. Looking at all the pieces you can see how convenient it is to have these items, and how a mounting bracket like the GearBox makes it easy to keep tjing together.

  21. Jason

    Ok I have to admit the fully decked and geared out cage looks pretty rad..but that leads to me to this question I've always wondered..Practicality and weight..Ive never used a cage obviously so don't judge, but I don't see how with all that loaded on the cage, you can one hand hold it and then pull focus on the follow focus, while keeping it in the air and steady...Even w.o all the gear loaded, how are you able to keep that steady with one hand and pulling focus? it just seems like it'd be heavy..

    Any insight or comments on those who use cages on the regular would be greatly appreciated.

  22. Emm

    Post author

    @Brandon - Probably not. It's not a complicated stud, just a simple 1/4"-20 screw found at your common hardware place. You might also want to look into Friction Arms, to easily mount and position things like an LED light, HDMI Monitor, and even a microphone.

  23. Brandon

    Sorry to be nit picky but does the Frio or other mount come with the stud that you would need to thread it onto the P&C cage???

  24. Emm

    Post author

    @ProductUv - Those original arms from P&C are great, but wait till you see these new (slightly more expensive) ones. This is an original product with Stainless steel accents, and designed from the ground up to be much stronger for heavier items.

  25. cliff

    Monster setup!

    I just ordered my cage today and cant wait to test it out.

    ?

    where did you get the mic holder and L-shaped XLR cable from.ive never seen those and would definitely love to grab a few.

    thanks for making lo-cost yet effective tools!

    Cliff

  26. Brandon

    Hey Emm what hot/cold shoe mount would u suggest to go along with this like the one u used in the example video?

  27. ProductUv

    Nice catch Joel the new arms look good. I have a package at the office from P&C with some arms, grips, and plates. Can't wait to try them out for a week long shoot. Ordered on Tues. and arrived on Thursday! (free shipping!) to the office in time thank you! to be shipped to Cincinnati for the shoot on Monday......

  28. Joel

    Didn't anyone else catch "...and sneak peek at new P&C Friction arms"?

    Look closely at the friction arms in the thumbnail.

  29. Emm

    Post author

    @Elias - Shipping is free to USA (lower 48 states) and would be $15 dollars for one GearBox internationally.

  30. Emm

    Post author

    @Len - It was not originally designed to be stacked, but we'll take a look at that suggestion.

  31. Emm

    Post author

    @McGuillicuddy - We've been using it on a Manfrotto Fluid Head (tripod), and using the handles to steer the camera instead of the pan bar. Feels pretty good. It can be used on a Monopod also.

  32. Emm

    Post author

    @Jem - The GearBox is not designed to work with Rods. The Grips aren't set very wide, and most FF's stick out a bit (not flush to the lens). I think you'd be able to pull focus quite easily, or you can always use a crank or whip.

  33. Len

    Can the Gearbox be made taller with a second set of extension adapters? If it can, will you sell those separately and how much will they cost?

  34. McGullicuddy

    @Emm ( or anyone who got one already)

    Have you shot with the gearbox on a Manfrotto fluid monopod yet? Was curious how it handles.

  35. Jem

    Emm,

    Do you think I could just use 15mm rods instead of the grips?

    I think the grips will be in the way of the follow focus as you can' put your hand through the side, or bending your arm around to get to it.

  36. Emm

    Post author

    @Sqweezy - I don't think it would be possible or even worth it. The wide platform P&C grips are fairly inexpensive as it is.

  37. Emm

    Post author

    @Jason - The handles are not the same. These handles don't have a wide platform and also have an alignment pin that prevents it from twisting under the plates.

  38. Owen

    Ordered! Would be great to see a matching top handle. Any plans in this regard? Are there any reasonably priced third party options that would fit? Are the little extension pieces 15mm?

  39. Jason

    Emm, I already have 2 handle grips from the pistol grib bundle. Are you going to sell the parts separate so I can build mine own w.o having to purchase two more handles?

    thanks

  40. Sqweezy

    @Emm

    I know you mentioned earlier that the handles on the Gearbox are not the same as the pistol grip handles sold separately. However, do you think an adapter plate could be made to convert them into something like the pistol grips?

  41. getem

    The GearBox is amazing, I love it. Just waiting for the rails , as soon as their live I will purchase them. The next step EMM might be manufacturing sliders and possibly a monitor later down the road.

  42. Chris A.

    @Emm- thanks I'm still thinking about picking one up, maybe i'll find away to add something to the extension adapters to make it a little taller

  43. Chris A.

    I seen the setup with a T2i + battery grip, but will it also fit with T2i + battery grip + quick release?

Leave a Reply

Your email address will not be published. Required fields are marked *



RSS Feed Widget


Top Selling Drones