DIY Prototype for 4th Axis Gimbal Stabilizer

Just an idea we threw together for a 4th Axis stabilizer that could dampen the 'Up/Down' movement from a gimbal when walking. Using 3D printed parts, the oil filled coil over shocks dampen both up and down movements. An inverted gimbal sits above the cheese plate and the operator holds the stabilizer using the outside handles.

The current setup with spring rating and oil viscosity currently can dampen around 5lbs. This can be changed by using different springs, adding spring clips, and or changing oil viscosity in the shocks. If you look very carefully, the design inspiration comes from a double wishbone-like upper and lower control arms found on sports cars (in this case large scale RC cars).

Some of you who follow know that i've been mounting my GoPro on one of my RC Cars, and I was truly surprised at how much movement could be dampened from this type of suspension.

It's already been proven that this type of suspension works to dampen movement even with large gimbals, as it's already in use with RC Gimbal Cars such as the FreeFly Tero RC Gimbal Car. We basically took the same idea and designed it into a handheld system.

freefly tero remote control gimbal car suspension
VIEW-ITEM FreeFly Tero Gimbal RC Car

Just for fun we wanted to see this idea in action, so we 3D printed all the parts and made this little prototype. In two days we went from sketch to prototype. We'll keep experimenting with this idea trying to tweak it and make a final metal version, but it would be interesting to see if this simple design is evolved by other people or companies in the near future.



Top Selling Drones




13 thoughts on “DIY Prototype for 4th Axis Gimbal Stabilizer

  1. Joe

    YES! This is really crazy, but I was actually coming to your site to see if there was anything like this that could be attached to the bottom of the CAME Single.
    It seems like such a simple idea and I'm surprised CAME-TV doesn't sell it as an add on.
    If you'd consider selling these I'd definitely purchase!

  2. Valentin

    Emm, why not combine that with you diy gimbal stabiliser backpack prototype?
    Add a screw eye hook at the end of each handle. Attach those handles to the gimbal stabiliser backpack prototype. And Voila you have a system ready to compete with the Ready Rig GS system for a third of the price.
    Combine with a Ronin M to the plate for a full stabilisation platform.
    I am glad that you are returning to the root of the blog DIY solution.

  3. Sergio

    Good idea. Have you also considered using a stabilizing bar/sway bar? It may help reduce roll when in motion, especially for top heavy loads.

  4. Mike Perry

    Very cool. I have the same model RC the FreeFly Tero was based off of that I have been toying with the idea of doing this with. You prototype would be nice to have.

Leave a Reply

Your email address will not be published. Required fields are marked *



RSS Feed Widget