There’s been a huge variety of video camera sliders in the past year, but if you’re still wondering what slider to get, maybe the Konova is one to look forward to. Highly regarded as the best bang for the buck, they are still adding in more options. I knew they had been working on a [...]

In case you didn’t catch the announcement, Cinevate is offering 30% off all Slider Models until February 8th. Find all the models and pricing options through the banner below. Just be sure to the coupon code ‘SLDSALE’ when checking out.

The Varavon Sliders come in a few variations from Slim, Mini, EX, and ENG models. The ‘Slim’ is the smallest and narrowest version of their slider weighing in at around 5lbs total. It’s the common roller bearing carrier design, so it’s very smooth, and friction can be adjusted with the bearings.

Old video above of [...]

Konova has one of the most popular roller bearing sliders on the market, and has now made available their new K5 slider which is a slightly larger version. The larger bearings and slightly larger carrier answers the call for supporting heavier payloads. Hopefully I should have a video review of this unit up soon, but [...]

A follow up video on the DIY Roller Bearing DSLR video camera slider. This is one that was posted about less than a week ago, and might give you some good ideas on crafting your own. It might not be suited for everyone, but you have to appreciate the effort put in to the instructional [...]

YouTube member Sunny01 shares a a simple DIY roller bearing slider most people can build out. A few T-shaped joining brackets on each side, some carefully spaced bearings on top and bottom allow the carrier to ride over the PVC pipes. If PVC isn’t your thing, there’s no reason you can’t redesign around some lightweight [...]

Cinema Skater DSLR Dolly
There’s no doubt that I love the Pico Flex Dolly and all that it has to offer, but some people with the largest cameras (AF100, FS100, RED Epic / Scarlet, etc.) want something with a larger platform. The solution could lie in the latest Kamerar Cinema Skater Rotating DSLR Video Dolly. [...]

Earlier in the week Vimeo member Bagelman showed us his version of a DIY Motorized JuicedLink video slider. I was curious to see if his setup could actually handle a straight up vertical shot, so he’s put together another demo. Yup, sure does go nice and smooth on a straight up vertical climb. [Thanks Gary]

[...]

From Vimeo member Freddy Cordova, a look at Jag35’s latest product – a video camera slider. A roller bearing block rides on two rails, requires two stands for elevated use, and optional leveling legs for ground use. Options for length are 2′ and 3′. You can check out pricing over at the Jag35.com website.
Jag35 [...]

Here’s a first look at the changes in the newest design Konova K-Slider – Video Camera Dolly. For some excellent examples of the old version in use, check out Olivia’s video (click here).
The most noticeable changes are with the new adjustable feet / legs. The ends of the slider have also been slightly changed [...]

I showed a simple way to motorize a Juicedlink slider, but didn’t have time to go out for some full video clip samples. If you’re wondering how smoothly it actually works, Vimeo member Chad Johnson has a review and provides some excellent examples of slider movements along with a JuicedLink jingle. You can find all [...]

I was testing this about a week ago, but finally published it to the public. Taking all the same little electronics from the JuicedLink DIY slider project (continuous servo, servo driver, and battery case) the little Pico Flex dolly is moving on it’s own. The speed is variable and with the size of the pulley. [...]

Juicedlink first introduced this slider idea as a prototype during NAB2011 (found here). The kit consists of a few different parts which are bundled or sold separately. The basic set will have at least a trolley (rolling carriage) and end clamps to hold a set of rods. The end clamps have three 1/4-20″ threaded taps [...]

A few people have already left links in the comments area that they have received their Pico Flex Dollies. They were supposed to begin shipping at a later date, and hopefully it was a surprise that many went out sooner. If you have one on order and haven’t received it yet, be patient as they [...]

Jason wanted to see the 717AH fluid head mounted to the Pico. Here’s a video clip showing the mount and how much area is left. The 717AH has the same base diameter as most video fluid heads so a variety should be able to fit without issues.
Now going back to using friction arms, many [...]

Some wardrobe hangers set on a couple of Push up bars are the foundation for this pretty slick DIY motion control slider by Vimeo member Jayhas. A wireless RC remote and continuous servo control the speed, and the basic rig is comprised of a few skateboard trucks. I think I have a good idea on [...]